- Virtual Cloud Computing; Future Development
Khaled Elbehiery, Hussam Elbehiery
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904040107
Abstract:
Today, Enterprises should take into consideration the cloud spending choices from 2019 – 2021 because of
growing amounts of data that customer is creating. Connecting user to the internet or connecting businesses
together brings success, higher shareholder value, and profits. While computing hardware is much faster and
cheaper than it was in the 20th century, the enormous amount of data that IoT (Internet of Things) and the
customer's expectation of a hyper-connected and personalized experience is driving the need for more advanced
cloud-based solution. The paper takes the reader to an advanced technology journey of Cloud Computing,
starting with virtual cloud infrastructure major components and ending with a new and unique homogenous
cloud approach that brings the public cloud native infrastructure and their software API to the On-Premise
environment to build and run modern and cloud-native applications anywhere reducing the resource cycles spent
on updating and patching the environment..
Keyword: Cloud Service Provider, Virtual Cloud Computing, Virtual Cloud Networking, Virtual Cloud
Storage, Homogeneous Cloud.
×
Copy and PasteKhaled Elbehiery, Hussam Elbehiery "Virtual Cloud Computing; Future Development
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- An Experimental Study on Engineering Properties of Concrete by
Partial Replacement of Cement with Waste glass powder and
Silica Fume
P Rishith, P Sai Krishna Reddy, B Sreeja, N Venkat Rao
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904040812
Abstract:
Concrete is the most versatile material used for construction all over the world. It is well known that concrete is
the combination of cement, aggregates and water. The production of cement results in the formation of carbon
dioxide gas causes the environmental pollution. About 7 percent of carbon dioxide gas is evolved from cement
industries to atmosphere all over the world. Use of waste glass powder and silica fume in concrete as partial
replacement of cement could be significant step towards development of sustainable, eco- friendly and
economical infrastructure systems. In the present study waste glass powder and silica fume are used in concrete
as a partial cement replacement with a view of reducing environmental pollution by minimizing the production
of carbon-dioxide and to improve........
Keyword: Waste glass powder, Silica fume, Compressive strength, Flexural strength and Tensile strength
×
Copy and PasteP Rishith, P Sai Krishna Reddy, B Sreeja, N Venkat Rao "An Experimental Study on Engineering Properties of Concrete by
Partial Replacement of Cement with Waste glass powder and
Silica Fume
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Nontraditional Observations with the SMAP Radiometer
Ralph D. Lorenz, Shannon M. Mackenzie
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904041319
Abstract:
The SMAP (Soil Moisture Active Passive) satellite carries an exquisite microwave radiometer. This instrument,
using a deployed 6m mesh antenna, makes polarimetric brightness temperature measurements at L-band (1.41
GHz) with a footprint of ~40km. While the mission is principally devoted to terrestrial hydrology and land use
studies, we are exploring the use of this unique observatory for applications analogous to those that might
exploit microwave radiometry at other planetary bodies, specifically towards the detection of volcanism on
Venus and lightning on Jupiter or other bodies..
Keyword: Microwave Radiometry; Volcanism; Lightning; Radio Frequency Interference
×
Copy and PasteRalph D. Lorenz, Shannon M. Mackenzie "Nontraditional Observations with the SMAP Radiometer
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- A Study on Traffic Survey at Tezpur Town of Assam, India
Manipuspak Hazarika, Bisakha Hazarika, Bivan Das, Chanu Choupash
Medhi, Gitartha Kalita, Lipi Das, Sudipta Gogoi
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904042028
Abstract:
This work is a case study based on a traffic survey done to know the current traffic scenario in Tezpur town of
Assam, India. Four manual studies-Traffic volume study, on-street parking study, off-street parking study and
spot speed study have been done at five junctions of the town to know the existing condition of vehicular traffic
and several recommendations are put forward to sort out the problem faced by the public daily and make a
smooth flow of traffic as far as possible..
Keyword: manual counts, off-street parking, on-street parking, spot speeds, traffic volume study
×
Copy and PasteManipuspak Hazarika, Bisakha Hazarika, Bivan Das, Chanu Choupash
Medhi, Gitartha Kalita, Lipi Das, Sudipta Gogoi "A Study on Traffic Survey at Tezpur Town of Assam, India
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Arduino Based Smart Indoor Ambiance Monitoring and Controlling System
V.S.D. Rekha, D.Swathi
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904042932
Abstract:
With the advancement in the field regarding the internet of things which greatly facilitates the
people's life and work. IoT has made very flexible and compatible in several types of equipment, which are
useful in developing automatic systems. The recent changes in the climatic environment affect the changes in
indoor temperature and the leakage of inflammable gases leads to the loss of lives and property. To avoid these
conditions, one must continuously monitor the indoor environment. The system that monitors indoor conditions
must be cost efficient and durable. As people paying are concerned about environmental quality, a set of
lightweight intelligent solutions is designed for the management and controlling of indoor conditions. The
system uses sensors to obtain environmental information like temperature, gas leakage, lighting conditions,
noise, and humidity, through the process of controllers will make an adaptive response, such as turn on the air
conditioner and alarm users. In this proposed paper, we proposed a system that can be an optimal advantage to
the backwardness of present room management and make people's work and life easy..
Keyword: ARDUINO, Wi-Fi, IoT, Sensors
×
Copy and PasteV.S.D. Rekha, D.Swathi "Arduino Based Smart Indoor Ambiance Monitoring and Controlling System
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Solar Radiation Data Mining
Sayali Satoskar, Tejas Talwadekar, Prof. Renuka Nagpure
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904043335
Abstract:
Solar energy is radiant light and heat from the Sun that is harnessed using a range of ever-evolving technologies
such as solar heating, photovoltaic, solar thermal energy, solar architecture, molten salt power plants and
artificial photosynthesis. It is an important source of renewable energy and its technologies are broadly
characterized as either passive solar or active solar depending on how they capture and distribute solar energy or
convert it into solar power. Solar energy being a renewable source of energy is a clean and pollution free energy
source available. For the effective utilization of solar energy received on earth, various research and
development is carried out. Estimation of Solar Energy received during day time and Increase in the efficiency
of Solar Systems is the need of hour. Data mining being a process of exploring patterns from large data sets that
can be applied for the purpose of determining the solar radiation received over a particular area on earth. This
system deals with capturing solar radiation......
Keyword: Solar, Radiation, Data Mining, Energy, Efficiency
×
Copy and PasteSayali Satoskar, Tejas Talwadekar, Prof. Renuka Nagpure "Solar Radiation Data Mining
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Role of OFDM in 4G LTE networks: A Literature review
Deepali B. Ingle, P. R. Gumble
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904043639
Abstract:
Orthogonal Frequency-Division Multiplexing (OFDM) effectively alleviates Intersymbol
Interference (ISI) caused by the delay spread of wireless channels. Therefore, it has been used in many wireless
systems and adopted by various standards. When the contemporary communications systems are considered,
OFDM is a Multicarrier (MC) multiplexing scheme that maintains adaptive communications features by
employing subcarriers in a flexible way.In this paper, we present a literature review on role of OFDM in 4th
Generation (4G) Long Term Evolution (LTE) wireless networks. We address basic principle ofOFDM and the
performance parameters of OFDM for LTE networks, such asInter Block Interference (IBI) and Peak-to-
Average Power Ratio (PAPR) reduction. We also describe the applications of OFDM in current systems and
standards..
Keyword: Orthogonal Frequency-Division Multiplexing (OFDM), 4th Generation (4G), Long Term Evolution
(LTE), Inter Block Interference (IBI), Peak-to-Average Power Ratio (PAPR).
×
Copy and PasteDeepali B. Ingle, P. R. Gumble "Role of OFDM in 4G LTE networks: A Literature review
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Influence of MWCNTs integration on Mechanical Behavior of E
Glass-Carbon Fiber Reinforced Epoxy Hybrid Nano Composites
Syed Basith Muzammil, Dr. P. Vijaya Kumar, Dr. H.K. Shivanand
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904044048
Abstract:
Composite materials are developed by hybridizing in a systematic integration of functionalized
multi walled carbon nano tubes by ultrasonic dispersion technique to homogenize the MWCNTs in Epoxy resin
5052 (Matrix), then layed up using Carbon fibers as high modulus and E glass fibers as low modulus fibers in bidirectional
twilled oven fabric form as a primary reinforcement and then compared with MWCNTs integration as
a secondary reinforcement in a volume fraction of 0.5%, 1.0% and 1.5% of the composites. Post curing of the
composites, the laminates were inspected for defects using ultrasonic B-Scan, then to ensure the calculated
matrix to reinforcement ratios, the matrix constituent analysis was done by resin digestion method. Composite
specimens were then subjected to mechanical testing. It was observed that Nano integration in composites
significantly enhances the mechanical properties.....
Keyword: E glass-Carbon hybrid nano composites, MWCNTs, Mechanical Properties, Compression strength
of G-CFRP composites, Flexural Modulus of G-CFRP composites, ILSS of G-CFRP composites.
×
Copy and PasteSyed Basith Muzammil, Dr. P. Vijaya Kumar, Dr. H.K. Shivanand "Influence of MWCNTs integration on Mechanical Behavior of E
Glass-Carbon Fiber Reinforced Epoxy Hybrid Nano Composites
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Migration from 4g LTE to Advanced PHY Techniques for Unmanned Aerial Vehicle (UAV) Communication
Pankaj Patel
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904044954
Abstract:
UAV (unmanned aerial vehicles) with their high mobility and low cost, have found a wide range of applications
during the past few decades. Historically, UAVs have been primarily used in the military, mainly deployed in
hostile territory to reduce pilot losses. With continuous cost reduction and device miniaturization, small UAVs
are now more easily accessible to the public; hence, numerous new applications in the civilian and commercial
domains have emerged. For the sake of boosting resilience against faults, natural disasters, and unexpected
traffic, the Unmanned Aerial Vehicle (UAV) assisted wireless communication systems can provide a unique
opportunity to cater for such demands in a timely fashion without relying on the overly-engineered cellular
network. However, for UAV-assisted communication, issues.....
Keyword: E LTE (4G), Non-orthogonal multiple access (NOMA), Unmanned Aerial Vehicle (UAV), Wireless
communication..
×
Copy and PastePankaj Patel "Migration from 4g LTE to Advanced PHY Techniques for Unmanned Aerial Vehicle (UAV) Communication
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- The Impact of Authentic Leadership on Job Satisfaction of the
civil engineers in Thailand
Nopphong Kerdngern, SutthathipKumthornpipattanakul, NarinthornSomthong
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904045560
Abstract:
This empirical research is to examine the relationship between project manager's authentic leadership style and
job satisfaction of the civil engineers in Thailand. Attaining job satisfaction is crucial to retain productive and
efficient employees. Therefore, one of the ways that may be effective help project managers in increasing the
satisfaction among their followers is employing the right leadership style.Four authentic leadership
characteristics which are self-awareness(SA), balanced processing of information (BPI), internalized moral
perspective (IMP)and relational transparency (RT)are discussed. Base on literature review, most previous
studies confirmed that these characteristics are significantly related to job satisfaction. An empirical study was
conducted by 400 civil engineers in Thailand. The quantitative study applies a survey type of research design.
The surveymethod using a structured questionnaire.....
Keyword: authentic leadership, job satisfaction, project manager, civil engineers.
×
Copy and PasteNopphong Kerdngern, SutthathipKumthornpipattanakul, NarinthornSomthong "The Impact of Authentic Leadership on Job Satisfaction of the
civil engineers in Thailand
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Design of Flexible Pavements by Stabilizing Poor Sub-Grade Soil
using Bitumen and Bitumen Epoxy Resin
Ch Shamitha, M Srinivas, K Saisaroja, B Suresh
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904046173
Abstract:
Stabilization is normally needed when soil strength is poor. Soil stabilization is done to make soil stable in terms
of reducing the permeability, compressibility and increasing the shear strength. There are various stabilizers
such as lime, cement, bitumen, and fly ash etc., used to stabilize the poor sub-grade soil. The main objective of
this research work is to obtain geotechnical and engineering properties of poor sub-grade soils by bitumen of
grade 80/100 as a stabilizer along with epoxy resin with varying percentages of bitumen and epoxy resin were
added from (2%, 4%, 6% and 8%) by weight of sub-grade soil. Soil properties like soil classification,
Atterberg‟s limits, California bearing ratio (CBR), Maximum dry density (MDD) are evaluated by varying
percentages of bitumen and epoxy resin mix and from CBR test results flexible pavement has been designed as
per IRC: 37-2001 on poor sub-grade soils.
Keyword: Soil stabilization, California bearing ratio, Maximum dry density and pavement design
×
Copy and PasteCh Shamitha, M Srinivas, K Saisaroja, B Suresh "Design of Flexible Pavements by Stabilizing Poor Sub-Grade Soil
using Bitumen and Bitumen Epoxy Resin
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- A Security Implementation for Thearchitectural Approach on EVoting
System
Bimal Kumar, Dr. Siddappa.M, Dr.K.F.Bharathi
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904047479
Abstract:
E-Voting system is one of the emerging way of technology for candidates casting their
supportable vote for the candidates for they to be elected. The whole system is divided into two main sector
with one on the client side communication and another on server side communication. The whole system which
comprises of Mobile Devices as the Voting Devices are connected to their respective servers. For the selfless
authentication a unique authentication protocol called Single Token Authentication Protocol (STAP) is being
created with the respective tokens through which the user is given a probable chance for the voting once. Once
the Vote is being casted for the supported ones the session token expires. Individual architecture which
comprises of the client and server operations is presented for the ease in use of the overall performance. The
experimental output which comprises of all the respective results of the proposed architecture..
Keyword: e-Voting System, STAP, Authentication Protocol,
×
Copy and PasteBimal Kumar, Dr. Siddappa.M, Dr.K.F.Bharathi "A Security Implementation for Thearchitectural Approach on EVoting
System
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Studies on Mechanical Behaviour of E-Glass- Kevlar fiber
reinforced epoxy Hybrid Composites with nano integration of
Functionalized MWCNTs
Syed Basith Muzammil, Dr. P. Vijaya Kumar, Dr. H.K. Shivanand
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904048087
Abstract:
Composite materials were systematically hybridized using high modulus synthetic Kevlar fibers and low
modulus E glass fibers in bidirectional plain oven orientation in equal proportion and fabricated with epoxy
resin 5052 then the mechanical properties of the Kevlar based hybrid composites were studied and comparatives
studies were done by integrating the functionalized multi walled carbon nanotubes in the volumetric proportion
of 0.5%, 1.0% and 1.5% respectively. The post curing procedures were followed and health of the composite
laminates was monitored using ultrasonic B-Scan. In the investigations it was seen that nano integration has
significantly enhanced the mechanical properties and effects on composites under various modes of mechanical
failures. In Thermogravimetric analysis (TGA) the actual reinforcement ratios were found to be 66.5%, 67.42%,
66.88% & 67.75% for 0%, 0.5%, 1% & 1.5%.....
Keyword: G-KFRP hybrid composites, MWCNTs reinforced Kevlar composites, Thermogravimetric analysis,
Mechanical properties of Kevlar hybrid composites
×
Copy and PasteSyed Basith Muzammil, Dr. P. Vijaya Kumar, Dr. H.K. Shivanand "Studies on Mechanical Behaviour of E-Glass- Kevlar fiber
reinforced epoxy Hybrid Composites with nano integration of
Functionalized MWCNTs
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Hybrid Multilayer Perceptron Back Propagation Using Channel Equalization in Neural Networks
Dr.R.N.Panda , Satyanarayan Pradhan
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0904048893
Abstract:
Inmostdigitalcommunicationsystems,bandwidthlimitedchannelalongwithmultipathpropagationcausesISI(InterSymbolInterference)tooccur.Thisphenomenoncausesdistortionofthegiventransmittedsymbolduetoothertransmittedsymbols.WiththehelpofequalizationISIcanbereduced.ThispaperpresentsasolutiontotheISIproblembyperformingblindequalizationusingANN(ArtificialNeuralNetworks).....
Keyword: BlindChannelEqualization,NeuralNetworks,NoisySignal,MultiLayerPerceptron, Error-BackPropagation
×
Copy and PasteDr.R.N.Panda, Satyanarayan Pradhan "Hybrid Multilayer Perceptron Back Propagation Using Channel Equalization in Neural Networks
" Vol. 9 - No. 4 (April 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×