- The use and abuse of 3D printing - Towards a mobile business
model framework
Henrik Barth, Magnus Holmén, Bengt-GöranRosén
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0911010109
Abstract:
The paper aim to clarify changes in user activities and behaviour across different types of actors
following the development of 3D printers. It proposes a mobile business model and outlining the features of
development for direct digital manufacturing.
The exploratory study show that the use of 3D printing a) lowers the knowledge and resource barriers for
experimentation and entrepreneurial entry, b) increases product and concept prototyping in product
development, c) provides a potential for business model innovation by expanding the boundaries of the firm
upstream and downstream, and d) becomes a ticket for entrepreneurial entry..
Keyword: .....
×
Copy and Paste Henrik Barth, Magnus Holmén, Bengt-GöranRosén"The use and abuse of 3D printing - Towards a mobile business
model framework" Vol. 9 - No. 11 (November 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- A Review on Implementation of Health Care Monitoring System
Using Wearable Sensor and Iot
Kajal A. Kotecha, DR. Hemant M. Baradkar
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0911011012
Abstract:
Now a days, safety is very important for industrial workplace, especially for workers constantly switching
working environments between indoor and outdoor. Therefore, an IoT network system which can monitor both
environmental and physiological can greatly improve the safety in the workplace. The network system
incorporates multiple wearable sensors to monitor environmental and physiological parameters. In today's world
it is very difficult to carry patients from home to hospitals for regular checkup. There are lot of challenges like
waiting in the queue, travelling time and patient may be prone to various infections moving in this polluted
environment. So the health care industry is focussing on in-home health care services where the patient can
undergo medical check-ups......
Keyword: Cloud Service, Index meter, Internet of Thing(IoT), MQIT, Wearable sensors.
×
Copy and PasteKajal A. Kotecha, DR. Hemant M. Baradkar "A Review on Implementation of Health Care Monitoring System
Using Wearable Sensor and Iot
" Vol. 9 - No. 11 (November 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Working of Electrochemical Grinding and Honing
Amarnath N A S, Akash S, Anand ShankarM, Akshay Kumar, Roopa D N
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0911011322
Abstract:
This paper presents the presents the working and process parameters of Electro Chemical Grinding and Honing
Process. The main aim of the work is to find the optimum values of machining parameters. The Non-Traditional
or Unconventional Machining Process has proved to be better than conventional machining process to a large
extent..
Keyword: Non-Traditional Machining, Electrochemical Grinding, Electrochemical Honing
×
Copy and PasteAmarnath N A S, Akash S, Anand ShankarM, Akshay Kumar, Roopa D N "Working of Electrochemical Grinding and Honing" Vol. 9 - No. 11 (November 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- A Variable p-CMA Algorithm for Blind Channel Equalization
Mohammad Salman al hazmi
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0911012326
Abstract:
In this work, we propose a novel variant of the conventional p- Constant Modulus Algorithm (p-CMA)
algorithm. The rationale behind our work is that the exponent p in the standard CMA can play significant role in
the convergence speed and steady-state performance of the algorithm. It was observed that the larger value of p
can provide faster convergence at the cost of higher steady-state excess mean-square-error (EMSE). On the
other hand, smaller value of p can give lower EMSE at the cost of the slower speed of convergence. Thus, in
this work, we develop a time variant p parameter by utilizing the energy of the estimation error such that the
value of p takes larger values in the beginning of adaptation and reduces to smaller values near steady-state.
Thus, it can achieve both faster convergence and smaller steady-state EMSE. Simulation results are provided to
support our theoretical claims.......
Keyword: ......
×
Copy and PasteMohammad Salman al hazmi "A Variable p-CMA Algorithm for Blind Channel Equalization" Vol. 9 - No. 11 (November 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Studies on Strength Properties of Fiber Reinforced Concrete
Ridha Nehvi, Prashant Kumar
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0911012733
Abstract:
Slump tests confirmed that the workability of coconut fibre as well as the recron 3s fibre in the mixes goes on
decreasing as the fibre content increases in the concrete mix. The slump value decreased from 83mm to 19mm
with coconut fibre whereas with recron 3s the decline was observed upto 33mm. Maximum compressive
strength to the tune of 35.6MPa was recorded with 0.5% recron 3s whereas maximum value for compressive
strength to the extent of 32.1MPa was recorded with 3% coconut fibre. Higher concentrations of coconut fibres
recorded negative effect on compressive strength. For tensile strength and flexural strength recron 3s (0.3%) and
coconut fibre (3%) recorded beneficial effects in improving the average tensile strength and average flexural
strength. However, recron 3s recorded maximum values for average tensile strength and flexural strength to the
extent of 3.4MPa & 6.83MPa.....
Keyword: Recron 3s,Coconut fibre, compressive strength, tensile strength ,flexural strength
×
Copy and PasteRidha Nehvi, Prashant Kumar "Studies on Strength Properties of Fiber Reinforced Concrete" Vol. 9 - No. 11 (November 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Current-Voltage Curves for Aqueous Solutions of Nacl:
Determination of the Limiting Current
Pilco, Alex, Mamani, Pedro, Chirinos, Hugo, Tinoco, Oscar
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0911013439
Abstract:
The demand for drinking water leads to find new water resources and treatment technologies. The desalination
of brackish water by electrodialysis is a good alternative, and for the process to be efficient, the limit current
density must first be known. The objective of this study was to determine the limit current density and the effect
of the volumetric feed flow on the limit current density, for a 1.000ppm aqueous NaCl solution, in an
electrodialysis module. Experimental tests were performed at different volumetric flows of 200, 400 and 600
mL / min. The results demonstrated a direct relationship between the limit current density and the volumetric
feed flowlikewise; the limit current density of the anion exchange film conditioned the process..
Keyword: Electrodialysis, ion exchange film, current-voltage curve, limit current.
×
Copy and PastePilco, Alex, Mamani, Pedro, Chirinos, Hugo, Tinoco, Oscar "Current-Voltage Curves for Aqueous Solutions of Nacl:
Determination of the Limiting Current" Vol. 9 - No. 11 (November 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Application of DEATo Increase Greenness of a Building
Vasudha Vasantrao Shinde, K.H. Ghorpade, S.S. Deshmukh
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0911014049
Abstract:
Green building is a best alternative for Traditional buildings according to Environmental policy it is increasingly
respected by the community. To achieve sustainable development, higher attention has been paid to economic
and environmental impacts associated with construction and operation of structures. So, to rate these green
buildings there are numbers of rating systems in India which helps to provide functional framework for
evaluation of environmental performance and containing Sustainable Development into building and
Construction process. In this research GRIHA, LEED and Eco- Housing these Indian green building assessment
tools are studied. In this project we used DEA and AHP for finding the factors upon which we can invest so that
we can achieve maximum greenness with limited available funds. AHP helps in finding the weights of each
factor. It helps in analyzing.....
Keyword: Analytical Hierarchy Process,CCR, DEA , Decision Making Units (DMU's) , Efficiency, Efficiency
Measurement System (EMS)
×
Copy and PasteVasudha Vasantrao Shinde, K.H. Ghorpade, S.S. Deshmukh "Application of DEATo Increase Greenness of a Building" Vol. 9 - No. 11 (November 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Intelligent Traffic Control System
Srinidhi Rachavelpula, Amit Rajendran
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0911015053
Abstract:
In India, bad traffic management has led to traffic congestion problems which is giving a negative impact on the
economy and the quality of life. Also, people in India usually break rules which leads to collision that end up
ultimately in accidents and also becomes a factor for traffic congestion. Hence, to eradicate this and manage the
traffic efficiently. A new system is introduced which can be coupled with the existing traffic system that can
help in controlling the problem. This new technology uses the concept of internet of things and servo motors to
handle the traffic as per the traffic lights. This technology will help in making the city a smart city enhancing the
quality of life..
Keyword: traffic, traffic management, smart city, IOT,intelligent traffic control system, traffic control
×
Copy and PasteSrinidhi Rachavelpula, Amit Rajendran "Intelligent Traffic Control System" Vol. 9 - No. 11 (November 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
- Automotive Design A New Approach Using Autodesk Fusion 360
Abdulrahman Matar Abbas Aldhafeeri, Emad Eldin Saleh Imam Hassan
[Abstract]
[PDF]
[Cite]
10.9790/9622- 0911015463
Abstract:
Fusion 360" helps students and educators prepare for the future of design. It's the first 3D CAD, CAM, and CAE
tool of its kind, connecting the entire product development process into one cloud-based platform.
"Fusion 360" helps mechanical engineers and automotive designers to break the limit on existing workflows and
engineer their parts with a complete set of 3D modeling tools that include parametric, freeform, direct, and
surface modeling.
It also helps them to simultaneously generate multiple options of their design while consolidating parts,
reducing weight, and improving overall product performance.
After design and modeling comes the simulation process. "Fusion 360" is equipped with great tools to test the
designs and ensure they will survive real world conditions using one model, in one affordable cloud-based
platform..
Keyword: .....
×
Copy and PasteAbdulrahman Matar Abbas Aldhafeeri, Emad Eldin Saleh Imam Hassan "Automotive Design A New Approach Using Autodesk Fusion 360" Vol. 9 - No. 11 (November 2019), International Journal of Engineering Research and Applications (IJERA) , ISSN: 2248-9622 , www.ijera.com
×
